4W Audio Transformer Kit for use with IPX Active Endpoints

IP-HT47

Availability: Call for Availability
Your Price:
$60.00
    DESCRIPTION

    When joined with an AtlasIED IPX audio or visual endpoint, that is registered as a communication endpoint directly within InformaCast, GCK, and SA-Announce advanced notifications, the IP-HT47 can drive 70V constant voltage loudspeakers to increase audio coverage area. This can improve the day-to-day communications through advanced alerting, bell schedules, pre-recorded & scheduled announcements, while leveraging the WAN or LAN network architecture.

    When used within a Cisco ecosystem and combined with an AtlasIED IPX audio or visual IP endpoint, the IP-HT47 can drive 70V speakers that can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

    Where 3rd party notification applications are not required, the IP-SA speakers can be attached to any IPX audio or visual IP endpoint that is registered as a SIP device directly to a SIP server or VoIP Communications Manager for critical alerts, intercom and public address applications.


    Features
    • Low insertion loss transformer
    • WAGO™ 221 series wire nuts
    • All installation hardware included

    SPECIFICATIONS
    Frequency Response (+/- 1dB) 60Hz - 12kHz
    Power Taps 0.5, 1, 2, 4 Watts
    Insertion Loss 1.0dB
    Maximum Power Rating 4 Watts
    Current Rating 20A
    Voltage Rating 600V
    Warranty Period 60 months from date of purchase

    SUPPORT FILES
    IP-HT47 Data Sheet IP-HT47 Data Sheet
    IP-HT47 Install Guide IP-HT47 Install Guide