Ver 1.0 16-April-2020
AtlasIED controllers such as IP100-series devices, GLOBALCOM software running on a Dell server or Enterprise/PRIZM client/server computers ship from AtlasIED with a particular configuration of Windows (embedded or server, as appropriate). The Windows environment has been pre-configured at the factory to allow the AtlasIED software to fully function as required. In some installations, these systems are added to the local Windows Domain or are integrated with Active Directory. In other cases, the local IT/network department may require certain things of devices added to the local area network. It has been found that sometimes the changes made locally to the Windows environment such as through domain/group policies can come into conflict with the needs of the AtlasIED software and its proper operation.
This article addresses Windows environment requirements to be aware of when applying local changes to the Windows environment, whether through domain/group policies or just to the device hosting the AtlasIED software. The latter sections address three specific security issues: Windows Update, firewalls and anti-virus software.
The following items are issues common to the Windows environment hosting GLOBALCOM/GCK or Enterprise/PRIZM software.
In addition to the requirements above, on a device hosting GLOBALCOM/GCK software, the following requirements apply:
In addition to the requirements above, on a device hosting Enterprise/PRIZM software, the following requirements apply:
It is AtlasIED's policy that Windows Updates should be set to Manual download/install (not auto) . We have found in the past that some Windows updates can make security changes to a system that go against the requirements stated above in this article and inhibit the proper operation of the system. Also, the Windows Update process often automatically reboots the system (at a time of its choosing), taking the operational system offline for a period of time.
For Windows embedded systems that AtlasIED ships, we have been providing approximately semi-annual Windows Security Updates in the form of offline updates that can be applied to our systems without the need for access to the Internet. One can copy these updates to a USB drive for example, and apply then (off-hours) to the AtlasIED IP100-based devices.
If an installation wishes to install their own Windows Updates such as to versions of Windows Server, it is recommended that you install then off-hours and fully re-test the system after installation to insure there are no ill effects due to the update. AtlasIED technical support can assist in diagnosing any problems encountered at our standard support rates in accordance with your contracted support plan, if any.
Earlier shipments of AtlasIED systems were made with Windows Firewall disabled as it was found to impede many communications of our software. Since then, we have determined how to co-exist with Windows Firewall, making exceptions (Firewall rules) for AtlasIED software as necessary. For systems running GLOBALCOM software, we currently have an installer that will turn on Windows Firewall and install the necessary rules for AtlasIED software. A similar installer for Enterprise/PRIZM hosts may be available in the future, as well.
If one wishes to manually set up Windows Firewall on another type of system/server, the Firewall should be configured to allow any outbound communication, and any inbound communication that has rules to allow it. Then one should add the following rules:
This refers to any kind of virus, worm, trojan, or other malicious software detection/remediation software. There are so many kinds and brands on the market, that it is impossible or impractical for AtlasIED to evaluate and keep up with all the offerings and revisions. Anti-virus software or updates to them can change the settings of a system, so they pose a potential risk to the system outside of AtlasIED's control. We do not have any specific recommendations on what anti-virus software can be used with AtlasIED software, although we do know of installations that have successfully deployed anti-virus software with no apparent ill effects on the operation of the AtlasIED software.
After installing anti-virus software on a system with AtlasIED software, one should be careful to check that it did not impose any restrictions contrary to the list of issues mentioned earlier in this article. It is recommended that one install such software off-hours and fully re-test the system after installation to insure there are no ill effects due to the anti-virus software. AtlasIED technical support can assist in diagnosing any problems encountered at our standard support rates in accordance with your contracted support plan, if any.